PE Mechanical Pass Rate, Format & Study Guide
A real reference for anyone preparing for the Principles and Practice of Engineering (PE) Mechanical — NCEES exam — pass rate, retake policy, how it's scored, and a practical study timeline. This is independent reference content, not a sales page: everything below is sourced from PE Mechanical's own certifying body.
What the PE Mechanical exam is
The NCEES PE Mechanical page lists 80 questions, made up of multiple-choice questions and alternative item types. The appointment is 9 hours: a 2-minute nondisclosure agreement, an 8-minute tutorial, the 8-hour exam and a 50-minute scheduled break. The exam is computer-based, offered year-round at NCEES-approved Pearson test centers, and closed book with an electronic reference handbook and the design standards listed in the specifications. There are three separate specifications, one for each module: HVAC and Refrigeration, Machine Design and Materials, and Thermal and Fluid Systems, effective with the October 2025 exam. NCEES lists a fee of US$400 and describes the exam as designed for engineers with a minimum of four years of post-college work experience.
Why it matters
The PE exam is the licensing exam that engineers take with their state board after gaining engineering experience.
Who this exam is for
Mechanical engineers with several years of experience who are preparing for one of the three NCEES PE Mechanical modules.
Pass rate
NCEES pass-rate table updated July 2026: HVAC and Refrigeration 71% first-time (799 examinees) and 40% repeat (229); Machine Design and Materials 61% first-time (401) and 39% repeat (140); Thermal and Fluid Systems 70% first-time (578) and 46% repeat (109). The figures summarize examinees under NCEES member boards for the half-year reported.
If you don't pass — retake policy
Retake rules are set by NCEES; confirm the current rules on its website before you register again.
How it's scored
NCEES reports the result of the PE exam as pass or fail only; examinees who do not pass receive a diagnostic report by major topic. The percent score in the portal mock is only a self-check, not a prediction of your result. Format: 80 questions per module in an 8-hour exam; the real exam also includes alternative item types that the portal does not simulate. The portal mock uses 80 multiple-choice questions drawn from the combined pool of all three modules in 480 minutes, so it is a practice set rather than a simulation of one module.
Format at a glance
The NCEES PE Mechanical page lists 80 questions, made up of multiple-choice questions and alternative item types. The appointment is 9 hours: a 2-minute nondisclosure agreement, an 8-minute tutorial, the 8-hour exam and a 50-minute scheduled break. The exam is computer-based, offered year-round at NCEES-approved Pearson test centers, and closed book with an electronic reference handbook and the design standards listed in the specifications. There are three separate specifications, one for each module: HVAC and Refrigeration, Machine Design and Materials, and Thermal and Fluid Systems, effective with the October 2025 exam. NCEES lists a fee of US$400 and describes the exam as designed for engineers with a minimum of four years of post-college work experience. 80 questions per module · 8 hours of exam time in a 9-hour appointment · computer-based with an electronic reference handbook · pass or fail only. NCEES reports the result of the PE exam as pass or fail only; examinees who do not pass receive a diagnostic report by major topic. The percent score in the portal mock is only a self-check, not a prediction of your result.
Full eligibility requirements and everything the PE Mechanical study portal includes is on the PE Mechanical product page.
What each domain actually tests
Each module has its own NCEES specification that gives a range of questions per area. HVAC and Refrigeration: loads and psychrometrics (18 to 27), distribution and systems (20 to 30), equipment and components (24 to 36), supportive knowledge (8 to 12). Machine Design and Materials: basic engineering practice (11 to 17), mechanics of materials (17 to 26), mechanical attachments (9 to 14), power transmission (9 to 14), mechanical components and assemblies (16 to 24), supportive knowledge (8 to 12). Thermal and Fluid Systems: thermal and fluid principles (19 to 29), fluid equipment and distribution (17 to 26), power systems and components (17 to 26), cooling and heating systems (12 to 18), supportive knowledge (5 to 8).
Eligibility requirements, in full
NCEES describes the exam as designed for engineers with at least four years of post-college work experience, and you register with NCEES and are approved by your licensing board. Boards set their own rules and application fees, so confirm them with the board of your jurisdiction.
What it actually costs
NCEES lists the exam fee at US$400, paid directly to NCEES. Some licensing boards also charge a separate application fee, and fees can change, so confirm the current amounts on the NCEES website and with your board.
Keeping the credential — maintenance & recertification
Keeping the credential current is set by NCEES; check its website for the current requirements.
How to actually prepare
Pick the module you will sit, start with its two or three widest areas in the NCEES specification, then use the other modules' questions for practice, and finish with timed 80-question runs of that module's topics.
What's changing (2026)
This guide follows the NCEES PE Mechanical exam page, the October 2025 module specifications and the NCEES pass-rate table, checked November 3, 2026. Fees, formats and policies can change, so confirm them with NCEES.
Want a full practice question bank built around this exact format?
See the PE Mechanical study portalTry a free sample first: Flashcards · Quiz · Mock Exam