Free study guide — no purchase required

PE Electrical Power Pass Rate, Format & Study Guide

A real reference for anyone preparing for the Principles and Practice of Engineering (PE) Electrical and Computer: Power — NCEES exam — pass rate, retake policy, how it's scored, and a practical study timeline. This is independent reference content, not a sales page: everything below is sourced from PE Electrical Power's own certifying body.

What the PE Electrical Power exam is

The NCEES PE Electrical and Computer: Power exam has 80 questions, made up of multiple-choice questions and alternative item types. The appointment is 9 hours with 8 hours of exam time and a 50-minute scheduled break; the exam is offered year-round. The exam is computer-based and closed book with the NCEES PE Electrical and Computer: Power reference handbook and searchable codes and standards, including NFPA 70 (2020), NFPA 70E (2021) and the 2017 National Electrical Safety Code. The exam specifications effective with the October 2025 exam list nine knowledge areas, each with a range of questions. NCEES lists a fee of US$400 and describes the exam as designed for engineers with a minimum of four years of post-college work experience.

Why it matters

The PE exam is the licensing exam that engineers take with their state board after gaining engineering experience.

Who this exam is for

Electrical engineers with several years of power systems, industrial or utility experience who are preparing for the NCEES PE Power exam.

Pass rate

62% (first-time)

NCEES pass-rate table updated July 2026: Electrical and Computer: Power 62% first-time (1,344 examinees) and 42% repeat (721). The figures summarize examinees under NCEES member boards for the half-year reported.

If you don't pass — retake policy

Retake rules are set by NCEES; confirm the current rules on its website before you register again.

How it's scored

NCEES reports the result of the PE exam as pass or fail only; examinees who do not pass receive a diagnostic report by major topic. The percent score in the portal mock is only a self-check, not a prediction of your result. Format: 80 questions in an 8-hour exam; the real exam also includes alternative item types that the portal does not simulate. The portal mock uses 80 multiple-choice questions in 480 minutes, so it is a practice set rather than a simulation of the full exam.

Format at a glance

Format: 80 questions · 8 hours of exam time in a 9-hour appointment · computer-based with an electronic reference handbook · pass or fail only
Real exam cost: US$400 payable to NCEES; some licensing boards charge a separate application fee

The NCEES PE Electrical and Computer: Power exam has 80 questions, made up of multiple-choice questions and alternative item types. The appointment is 9 hours with 8 hours of exam time and a 50-minute scheduled break; the exam is offered year-round. The exam is computer-based and closed book with the NCEES PE Electrical and Computer: Power reference handbook and searchable codes and standards, including NFPA 70 (2020), NFPA 70E (2021) and the 2017 National Electrical Safety Code. The exam specifications effective with the October 2025 exam list nine knowledge areas, each with a range of questions. NCEES lists a fee of US$400 and describes the exam as designed for engineers with a minimum of four years of post-college work experience. 80 questions · 8 hours of exam time in a 9-hour appointment · computer-based with an electronic reference handbook · pass or fail only. NCEES reports the result of the PE exam as pass or fail only; examinees who do not pass receive a diagnostic report by major topic. The percent score in the portal mock is only a self-check, not a prediction of your result.

Full eligibility requirements and everything the PE Electrical Power study portal includes is on the PE Electrical Power product page.

What each domain actually tests

The NCEES Power specification gives a range of questions for each of nine areas: measurement and instrumentation (6 to 9), general applications (8 to 12), electrical safety (10 to 15), circuit analysis (10 to 15), power electronic circuits and control devices (5 to 8), rotating machines (5 to 8), electric power devices (8 to 12), transmission and distribution analysis (8 to 12) and protection (10 to 15).

Eligibility requirements, in full

NCEES describes the exam as designed for engineers with at least four years of post-college work experience, and you register with NCEES and are approved by your licensing board. Boards set their own rules and application fees, so confirm them with the board of your jurisdiction.

What it actually costs

NCEES lists the exam fee at US$400, paid directly to NCEES. Some licensing boards also charge a separate application fee, and fees can change, so confirm the current amounts on the NCEES website and with your board.

Keeping the credential — maintenance & recertification

Keeping the credential current is set by NCEES; check its website for the current requirements.

How to actually prepare

Start with the widest areas, electrical safety, circuit analysis and protection, then work through transmission and distribution, power devices and the remaining areas, and finish with timed 80-question runs.

What's changing (2026)

This guide follows the NCEES PE Electrical and Computer exam page, the October 2025 Power specification and the NCEES pass-rate table, checked November 3, 2026. Fees, formats and policies can change, so confirm them with NCEES.

Want a full practice question bank built around this exact format?

See the PE Electrical Power study portal

Try a free sample first: Flashcards · Quiz · Mock Exam